G&G RK SERIES RK103 EVO
The RK103 EVO CRANE replica is made of steel and plastic. Only the pistol grip, the stock and the RIS rails were made of plastic. The stock’s length is changeable (6 positions) and the total length of the replica is 1030mm.
The firing mode selection lever is located on the right side of the replica and is marked with graphic markings of the firing mode. The replica is equipped with the PBB system which perfectly imitates the operation of the original equivalent. It sets the bolt carrier dummy in motion and gives a perceptible “kick” effect felt on the shooter’s shoulder.
After pulling the cocking handle, the dust cover opens and the bolt carrier’s dummy moves backwards to the rear position. This allows to adjust the hop-up system.
The replica was made in black color.
An extraordinary Blow-Back system provides additional realism for the user of the replica and ensures additional experiences for the user himself.
The Pneumatic Blow-Back system operates on the principal of taking a part of the compressed air from the gearbox to a special cylinder that is located above the gearbox’s casing. The small piston that is located in the Pneumatic Blow-Back system moves a thin plate that is attached to it. The plate imitates the bolt carrier.
The G&G replicas that are equipped with the Pneumatic Blow-Back system have got a reinforced and modified V.3 gearbox. The modification that was made was the adaptation of the gearbox to the Pneumatic Blow-Back system and adding the “active main spring release” button in the form of the actuator.
This model also uses a SF type stock thanks to which we can comfortably hide a LiPo 1600 mAh battery.